Sleipner Knife Blank - S10 (S10)

Sleipner Knife Blank - S10

A hardened, ground blade blank ready for handle work. The heat treatment is done and the geometry is set — everything after this is yours.

Uddeholm Sleipner is a cold-work tool steel with high chromium content, so it resists staining better than ordinary carbon steel while hardening to 60-62 HRC.

The steel comes straight from Voestalpine. Profiling and grinding happen on our benches; hardening and tempering go back to the mill.

Specifications
Steel : Uddeholm Sleipner Tool Steel
Hardness : 60-62 HRC
Thickness : 4,4 mm (0.17 in)
Blade Length : 125 mm (4.9 in)
OAL : 250 mm (9.8 in)
Tang : Full Tang
Pin Holes : 4&6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind

Handle stock, pins and epoxy finish this one. The grinding and hardening — the two steps most makers cannot do at home — are already done.

We grind every category of knife blade blank in house: EDC and outdoor blades, hunting and bushcraft profiles, puukko and scandi patterns, and a full range of Japanese chef knife blanks. Sent sharpened as standard. Add a note at checkout if you want it left unsharpened.

All orders ship UPS Express. Allow 1-3 business days to Europe and 2-5 to the USA.