1.4116 Sandblasted Knife Blank - SK29 (SK29)

1.4116 Sandblasted Knife Blank - SK29

A sandblasted finish hides scratches and kills glare. It also gives a grippy, matte surface that looks finished straight off the blank. A full tang knife blank, so the scales pin straight to the steel.

X50CrMoV15 is the pragmatic stainless. Molybdenum and vanadium give wear resistance without brittleness, and maintenance is close to zero.

The steel comes straight from Voestalpine. Profiling and grinding happen on our benches; hardening and tempering go back to the mill.

Specifications
Steel : 1.4116 (X50CrMoV15) German Stainless Steel
Hardness : 55-56 HRC
Thickness : 3,5 mm (0.14 in)
Blade Length : 140 mm (5.5 in)
OAL : 250 mm (9.8 in)
Pin Holes : 4&6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind (with secondary bevel)

Everything after this is assembly. Pick your scales, match the pin holes, and you have a finished knife without touching a heat treat oven.

This is one of several hundred knife blade blanks we produce, from EDC and bushcraft profiles through to chef and kitchen blanks. Sent sharpened as standard. Add a note at checkout if you want it left unsharpened.

UPS Express handles our shipping: 1-3 business days to European addresses, 2-5 to the USA.