D2 Knife Blank - DI28 (DI28)

D2 Knife Blank - DI28

This blank arrives ground and hardened, which removes the two hardest steps from a knife build.

Böhler K110 (D2) is the classic semi-stainless tool steel. High carbide volume gives excellent wear resistance; it needs a little more care than a true stainless.

Every blank starts as certified Voestalpine stock. We profile and hand grind it in our own workshop, then send it back to Voestalpine for professional heat treatment.

Specifications
Steel : Böhler K110 (D2) Tool Steel
Hardness : 60-61 HRC
Thickness : 5 mm (0.2 in)
Blade Length : 130 mm (5.1 in)
OAL : 250 mm (9.8 in)
Tang : Full Tang
Pin Holes : 6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind

Handle stock, pins and epoxy finish this one. The grinding and hardening — the two steps most makers cannot do at home — are already done.

We grind every category of knife blade blank in house: EDC and outdoor blades, hunting and bushcraft profiles, puukko and scandi patterns, and a full range of Japanese chef knife blanks. Arrives ground and sharpened. Ask for it unsharpened if you prefer to set your own edge.

Sent by UPS Express worldwide, reaching Europe within 1-3 business days and the USA within 2-5.