D2 Puukko Knife Blank - DI37 (DI37)

D2 Puukko Knife Blank - DI37

The puukko is Finland's contribution to knife design and still one of the most practical patterns ever drawn. Short, stiff, and shaped for carving.

D2 has been a knife steel staple for decades. It holds an edge a long time and rewards a maker who does not mind wiping the blade down.

We buy steel direct from Voestalpine, grind each blade by hand on the belt grinder, and return the blanks to Voestalpine for heat treatment done to spec.

Specifications
Steel : Böhler K110 (D2) Tool Steel
Hardness : 60-61 HRC
Thickness : 5 mm (0.2 in)
Blade Length : 160 mm (6.3 in)
+Tail Length : 75 mm (3 in)
Tang : Hidden Tang
Pin Holes : 4&6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind

Everything after this is assembly. Pick your scales, match the pin holes, and you have a finished knife without touching a heat treat oven.

Knife making supplies are all we do. Outdoor, EDC, hunting and kitchen blade blanks, ground in house and heat treated at the mill. Arrives ground and sharpened. Ask for it unsharpened if you prefer to set your own edge.

Shipped worldwide with UPS Express — 1-3 business days to Europe, 2-5 to the USA.