N690 EDC Knife Blank - N25 (N25)

N690 EDC Knife Blank - N25

Everyday carry is about compromise done well: enough blade to be useful, little enough to disappear on the belt. This blank sits in that sweet spot.

This is Böhler's cobalt-alloyed stainless. In outdoor use it holds an edge through hard work and does not pit when the knife lives in a damp sheath.

We buy steel direct from Voestalpine, grind each blade by hand on the belt grinder, and return the blanks to Voestalpine for heat treatment done to spec.

Specifications
Steel : Böhler N690 Stainless Steel
Hardness : 58-60 HRC
Blade Length : 90 mm (3.5 in)
OAL : 195 mm (7.7 in)
Tang : Full Tang
Pin Holes : 4 mm (0.16 in) & 6 mm (0.24 in) & 8 mm (0.31 in)
Grinding : High Flat Grind

Hidden tang or scales, the blank is ready either way. No regrinding needed before you fit a handle.

We grind every category of knife blade blank in house: EDC and outdoor blades, hunting and bushcraft profiles, puukko and scandi patterns, and a full range of Japanese chef knife blanks. Arrives ground and sharpened. Ask for it unsharpened if you prefer to set your own edge.

Your order travels UPS Express — 1-3 business days for Europe, 2-5 for the United States.