N690 Knife Blank - N95 (N95)

N690 Knife Blank - N95

A hardened, ground blade blank ready for handle work. The heat treatment is done and the geometry is set — everything after this is yours. A full tang knife blank, so the scales pin straight to the steel.

Böhler N690 is the stainless most outdoor makers settle on. Cobalt and vanadium give it fine grain and real edge retention, and 17% chromium means it survives a wet pack.

Every blank starts as certified Voestalpine stock. We profile and hand grind it in our own workshop, then send it back to Voestalpine for professional heat treatment.

Specifications
Steel : Böhler N690 Stainless Steel
Hardness : 58-60 HRC
Thickness : 4,2 mm (0.17 in)
Blade Length : 125 mm (4.9 in)
OAL : 250 mm (9.8 in)
Pin Holes : 6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind (with secondary bevel)

No regrinding needed before you fit a handle.

This is one of several hundred knife blade blanks we produce, from EDC and bushcraft profiles through to chef and kitchen blanks. Delivered ground, hardened and sharpened. Free laser engraving is available on request.

Sent by UPS Express worldwide, reaching Europe within 1-3 business days and the USA within 2-5.