Sleipner Knife Blank - S19 (S19)

Sleipner Knife Blank - S19

This blank arrives ground and hardened, which removes the two hardest steps from a knife build.

Uddeholm Sleipner is a cold-work tool steel with high chromium content, so it resists staining better than ordinary carbon steel while hardening to 60-62 HRC.

The steel comes straight from Voestalpine. Profiling and grinding happen on our benches; hardening and tempering go back to the mill.

Specifications
Steel : Uddeholm Sleipner Tool Steel
Hardness : 60-62 HRC
Thickness : 4,4 mm (0.17 in)
Blade Length : 120 mm (4.7 in)
OAL : 245 mm (9.6 in)
Tang : Full Tang
Pin Holes : 4&6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind

Handle stock, pins and epoxy finish this one. The grinding and hardening — the two steps most makers cannot do at home — are already done.

We grind every category of knife blade blank in house: EDC and outdoor blades, hunting and bushcraft profiles, puukko and scandi patterns, and a full range of Japanese chef knife blanks. Arrives ground and sharpened. Ask for it unsharpened if you prefer to set your own edge.

All orders ship UPS Express. Allow 1-3 business days to Europe and 2-5 to the USA.