Sleipner Knife Blank - S60 (S60)

Sleipner Knife Blank - S60

This blank arrives ground and hardened, which removes the two hardest steps from a knife build. A full tang knife blank, so the scales pin straight to the steel.

Uddeholm Sleipner is a cold-work tool steel with high chromium content, so it resists staining better than ordinary carbon steel while hardening to 60-62 HRC.

Steel sourced from Voestalpine, hand ground by our team, then heat treated professionally at the mill. Every blank arrives at working hardness.

Specifications
Steel : Uddeholm Sleipner Tool Steel
Hardness : 60-62 HRC
Thickness : 4,4 mm (0.17 in)
Blade Length : 115 mm (4.5 in)
OAL : 240 mm (9.4 in)
Pin Holes : 4&6 & 8 mm (0.24 & 0.31 in)
Grinding : High Flat Grind

Handle stock, pins and epoxy finish this one. The grinding and hardening — the two steps most makers cannot do at home — are already done.

This is one of several hundred knife blade blanks we produce, from EDC and bushcraft profiles through to chef and kitchen blanks. Sent sharpened as standard. Add a note at checkout if you want it left unsharpened.

Posted with UPS Express — Europe sees it in 1-3 business days, the USA in 2-5.